![]()
Knives from Tim Britton of Linville Knife and Tool
Click on any picture or description below for a more detailed photo
| Tim Britton is a Custom Knifemaker and longstanding Knifemakers' Guild member, long known for his high quality designs, formerly available only to serious collectors. Tim is now at Linville Knife and Tool and offers some of their kits and blades to the general public. Very high quality for the price, I really think you'll like this series as much as I do. |
|
Handy |
||||
![]() |
NCK-HANDY | $12.50 | ||
| aaaaaa | ||||
|
Knockabout The Knockabout is back! Terrific backpack or hiking sized blade. 7" overall with a very useful 2 3/4" blade. The center cut out in the handle reduces weight even further. 7/32" thick. Mirror polished AUS-8 steel. Use 1/8" pins. Thong hole if 3/16". |
||||
![]() |
NCK-KNOCKABOUT | $12.50 | ||
| aaaa | ||||
|
CEO The CEO is a new folder design from Tim Britton of Linville Knife and tool. A great companion to the popular Day-Ops and Night-Ops. Who says a hard working folding knife can't be dressy? 8" overall with a 3/12" blade made from AUS-8, tempered to an RC58 hardness. T6 aircraft aluminum frame, the lacquered scales can be assembled as received or used as a pattern for your own decorative wood scales. This is the first time I've seen Tim use a thumb disk on the spine for easy, one handed , left or right hand opening. Assembly is easy, but set aside a full night for this. You'll need T6 and T8 Torx screwdrivers. Click HERE for a picture of the backside pocket clip . |
||||
![]() |
||||
| NCK-CEO |
$ 35.50 | |||
|
Day-Ops |
|||||||||||
![]() |
Larger Picture of the Day-Ops, Click
Here Another Picture of the Day-Ops, Click Here What's in the kit? Click Here Day-Ops Step-By-Step Tutorial Click Here How about a picture of a cool Modification? Click Here |
||||||||||
| Day-Ops Folder Kit |
NCK-DAY-OPS |
$35.50 | |||||||||
|
|||||||||||
|
Mingo Tim Britton from Linville Knife and Tool does it again with the everyday-carry sized liner lock blade. Slim, light, extremely well engineered and beautiful, this kit includes all hardware and a set of CNC precision machined G10 scales. 420SS frame and bolsters; AUS-8 blade rockwell hardness RC58; torx screws throughout; 1/4" 304SS pivot pin; 3 1/4" closed, 5 1/2" open. I think the G10 looks great but if you prefer, you could use these as a pattern for your own fancy wood scales. For a larger picture, click HERE |
|||||||||||
|
NCK-MINGO |
$ 29.50 | |||||||||